How To Install A Hot Tub In The Ground
Immerspa Installation
Installation is surprisingly easy! Our fiberglass inground spas were designed specifically for installation, requiring only a short amount of time and a few bones materials. With your spa you'll go all the specialized components needed, pre-assembled, for easy associates. You'll be amazed at how quick and easy it is:
01
Excavate a hole
Dig the hole viii–12″ wider than the footprint of the spa and a minimum of 41″ from the desired top of the spa. Be sure to add space for any finishes to the edges like coping.
02
Prepare the hole
Install the filter fabric and weeping tile around the outer edge of the hole. Add a minimum half dozen″ base of three/four″ clear rock.
03
Lower the spa in and level
Lower in the spa and make sure it's at the desired height and level. Tighten the hoses continued to the pump and connect the electricity.
04
Backfill and connect
Later checking the base to ensure information technology is level and the desired elevation, brainstorm filling with water to stabilize the spa.
05
Fill with water and enjoy!
Fill the tub near one/iii full before starting time to backfill with 3/4″ clear stone. Fill up the spa upwardly to well-nigh ii–3″ below the top height of the spa.
Finish your surrounding surfaces as yous like. A multifariousness of elements works well – natural stone, rockeries and built up gardens, possibly even a privacy wall for an added secluded feel. Fill your pool, step in and enjoy…
CONTACT US
For more information or to order, Call 1 (844) 663-7772 or electronic mail info@immerspa.com.
Source: https://immerspa.com/installation/
Posted by: greenequareatunto.blogspot.com
0 Response to "How To Install A Hot Tub In The Ground"
Post a Comment